Avery Dennison MPI 1105 SuperCast Gloss LTR StaFlat Wrap Film
From $770.89
Avery Dennison MPI 1105 SuperCast Gloss LTR StaFlat Wrap Film
MPI1105S-6461
Couldn't load pickup availability
Gloss-white SuperCast film for printed wraps
MPI 1105 SuperCast Gloss LTR SF is a 2.0 mil opaque, high-gloss white cast vinyl for printed vehicle and fleet graphics and signage. It conforms to flat surfaces, rivets, corrugations, and complex curves. The long-term removable acrylic adhesive has a gray opacifying layer.
Conventional installation with a smooth liner
The 90# smooth StaFlat liner does not have Easy Apply air-release channels or RS slideability and repositionability. Installers manage trapped air using their application technique. LTR describes removal capability after service, not an installation feature. Apply dry only.
Specifications
| Film | Opaque, high-gloss white cast vinyl |
|---|---|
| Film thickness | 2.0 mil / 51 microns |
| Adhesive thickness | 1.0 mil / 25 microns |
| Adhesive | Clear long-term removable acrylic with gray opacifying layer |
| Liner | 90# smooth StaFlat |
| Air release | No |
| RS slideability and repositionability | No |
| Printed outdoor durability | Up to 7 years, vertical exposure, subject to Avery Dennison ICS conditions |
| Compatible printing | Solvent, eco-solvent, latex, UV, and approved screen printing |
| Suitable surfaces | Flat, riveted, corrugated, and complex curves |
| Minimum application temperature | 45°F flat; 50°F rivets/corrugations; 60°F complex curves/watercraft |
| Service temperature | −50°F to 180°F |
| Shelf life | 2 years from manufacture under specified storage conditions |
| Installation | Dry application only |
UV printing is limited to flat surfaces unless qualified flexible UV inks are used. Published durability depends on application and warranty conditions; removal is not guaranteed residue-free.
